The wide range of Doladela corrugated sheets can be the ideal solution for construction or metalworking projects. Manufactured from cold-rolled steel sheet CRC, HDG or PPGI, our corrugated products ensure durability, versatility, and a modern aesthetic appearance, while also providing a cost-effective and easy-to-install solution.
The wide range of Doladela corrugated sheets can be the ideal solution for construction or metalworking projects. Manufactured from cold-rolled steel sheet CRC, HDG or PPGI, our corrugated products ensure durability, versatility, and a modern aesthetic appearance, while also providing a cost-effective and easy-to-install solution.
The wide range of Doladela corrugated sheets can be the ideal solution for construction or metalworking projects. Manufactured from cold-rolled steel sheet CRC, HDG or PPGI, our corrugated products ensure durability, versatility, and a modern aesthetic appearance, while also providing a cost-effective and easy-to-install solution.
The wide range of Doladela corrugated sheets can be the ideal solution for construction or metalworking projects. Manufactured from cold-rolled steel sheet CRC, HDG or PPGI, our corrugated products ensure durability, versatility, and a modern aesthetic appearance, while also providing a cost-effective and easy-to-install solution.
H12 corrugated sheets are commonly meet for fencing or interior/exterior cladding of sheds, warehouses, fences, various metal structures, and more.
The use of the H12 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The H12 corrugated sheet can be produced from three types of raw material: CRC (Cold Rolled Coils), HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
The H12 profile can be manufactured from two raw material widths: 1250 mm or 1000 mm, and is produced in custom lengths, according to the customer’s specifications.
Technical Details
| Thickness: | 0.25 - 0.7 mm |
| Rib height: | 12 mm |
| Available effective widths: | 1010 / 810 mm |
| Length: | 500 - 13.500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines.
Wide range of fixing accessories and sheet metal components.
Available colours
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
This profile is commonly used for applications such as cladding with small or medium spans, cladding exposed to moderate loads, or other technical or functional design elements.
The H35 corrugated sheet can be manufactured from HDG (galvanized steel sheet)
The use of the H35 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The H35 corrugated sheet can be profiled from two raw material widths: 1250 mm or 1000 mm, and produced in custom lengths according to the customer’s specifications.
Technical Details
| Thickness: | 0,35 - 1,2 mm |
| Rib height: | 35 mm |
| Available effective widths: | 890 / 712 mm |
| Standard lengths: | 500 - 13.500 mm |
| Production lead time: | 2 – 14 days for raw materials available in stock |
Short production deadlines
Wide range of fixing accessories and sheet metal components
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
The H60 profile, obtained through cold roll-forming from galvanized or pre-painted steel, is commonly used in various applications, such as production halls, warehouses, industrial facilities, as well as for covereges with medium spans.
The H60 corrugated sheet can be manufactured from two types of raw material: CRC (Cold Rolled Coils) steel and HDG (Hot Dip Galvanized) steel.
The specific use of the H60 profile depends on the particular requirements of each project and the adopted technical solutions.
The H60 corrugated sheet can be roll-formed from raw materials with widths of 1250 mm or 1000 mm, and produced in custom lengths, according to the customer’s specifications.
Technical Specifications
| Thickness range | 0.5 - 2 mm |
| Corrugation height | 60 mm |
| Available effective widths | 760 / 600 mm |
| Standard lengths | 500 - 6.000 mm |
| Lead time | 2 – 14 days for in-stock materials |
Short production schedules
Wide range of fixing elements and sheet metal accessories
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 6,000 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
This profile is valued for its versatility and modern look, featuring fine and subtle lines.
It is used in a variety of applications, especially where cost-effective and fast cladding or enclosure solutions are required — such as for walls, lightweight perimeter closures, temporary or decorative partitions, finishing elements, or technical coverings in commercial and industrial spaces.
The use of the T10 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The T10 corrugated sheet can be produced from three types of raw material: CRC (Cold Rolled Coils) and HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
The T10 profile can be manufactured from two raw material widths: 1250 mm or 1000 mm, and is produced in custom lengths, according to the customer’s specifications.
Technical Details
| Thickness: | 0.25 - 0.7 mm |
| Rib height: | 10 mm |
| Available effective widths: | 1100 / 880 mm |
| Length: | 500 - 13500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines
Wide range of fixing accessories and sheet metal components
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
This is a technically styled product, commonly used in projects that require a balance between lightweight construction and geometry suitable for a wide range of applications — such as wall cladding, light enclosures, annexes or technical spaces, and linings with both aesthetic and functional roles.
The use of the T18 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The T18 corrugated sheet can be produced from three types of raw material: CRC (Cold Rolled Coils) and HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
Technical Details
| Thickness: | 0,25 - 0,7 mm |
| Rib height: | 16,5 mm |
| Available effective widths: | 1119 mm |
| Length: | 500 - 13.500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines
Wide range of fixing accessories and sheet metal components
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
T30 Trapezoidal Profile Sheet is commonly used in cladding or partitioning applications, both indoors and outdoors. This profile offers an optimal balance between rigidity and lightweight structure, making it ideal for wall cladding, partitions, light enclosures, annexes or technical spaces, and linings with both aesthetic and functional purposes.
The use of the T30 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The T30 corrugated sheet can be produced from three types of raw material: CRC (Cold Rolled Coils) and HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
Technical Details
| Thickness: | 0,25 - 1,2 mm |
| Rib height: | 31 mm |
| Available effective widths: | 1050 mm |
| Length: | 500 - 13.500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines
Wide range of fixing accessories and sheet metal components
Available colours
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
Sinus 20 Corrugated Sheet is a wavy profile made from galvanized or pre-painted steel sheet, ideal for interior and exterior cladding where a clean, modern, and aesthetic finish is desired. With its continuous curved line, this profile delivers a distinct architectural look and integrates easily into commercial, industrial, or residential projects.
The use of the SINUS 20 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The SINUS 20 corrugated sheet can be produced from two types of raw material: HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
The SINUS profile can be manufactured from two raw material widths: 1250 mm or 1000 mm, and is produced in custom lengths, according to the customer’s specifications.
Technical Details
| Thickness: | 0,35 - 1,2 mm |
| Rib height: | 18 mm |
| Available effective widths: | 838,2 - 1066,8 mm |
| Length: | 500 - 13.500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines
Wide range of fixing accessories and sheet metal components
Available colours
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
H12 corrugated sheets are commonly meet for fencing or interior/exterior cladding of sheds, warehouses, fences, various metal structures, and more.
The use of the H12 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The H12 corrugated sheet can be produced from three types of raw material: CRC (Cold Rolled Coils), HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
The H12 profile can be manufactured from two raw material widths: 1250 mm or 1000 mm, and is produced in custom lengths, according to the customer’s specifications.
Technical Details
| Thickness: | 0.25 - 0.7 mm |
| Rib height: | 12 mm |
| Available effective widths: | 1010 / 810 mm |
| Length: | 500 - 13.500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines.
Wide range of fixing accessories and sheet metal components.
Available colours
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
This profile is commonly used for applications such as cladding with small or medium spans, cladding exposed to moderate loads, or other technical or functional design elements.
The H35 corrugated sheet can be manufactured from HDG (galvanized steel sheet)
The use of the H35 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The H35 corrugated sheet can be profiled from two raw material widths: 1250 mm or 1000 mm, and produced in custom lengths according to the customer’s specifications.
Technical Details
| Thickness: | 0,35 - 1,2 mm |
| Rib height: | 35 mm |
| Available effective widths: | 890 / 712 mm |
| Standard lengths: | 500 - 13.500 mm |
| Production lead time: | 2 – 14 days for raw materials available in stock |
Short production deadlines
Wide range of fixing accessories and sheet metal components
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
The H60 profile, obtained through cold roll-forming from galvanized or pre-painted steel, is commonly used in various applications, such as production halls, warehouses, industrial facilities, as well as for covereges with medium spans.
The H60 corrugated sheet can be manufactured from two types of raw material: CRC (Cold Rolled Coils) steel and HDG (Hot Dip Galvanized) steel.
The specific use of the H60 profile depends on the particular requirements of each project and the adopted technical solutions.
The H60 corrugated sheet can be roll-formed from raw materials with widths of 1250 mm or 1000 mm, and produced in custom lengths, according to the customer’s specifications.
Technical Specifications
| Thickness range | 0.5 - 2 mm |
| Corrugation height | 60 mm |
| Available effective widths | 760 / 600 mm |
| Standard lengths | 500 - 6.000 mm |
| Lead time | 2 – 14 days for in-stock materials |
Short production schedules
Wide range of fixing elements and sheet metal accessories
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 6,000 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
This profile is valued for its versatility and modern look, featuring fine and subtle lines.
It is used in a variety of applications, especially where cost-effective and fast cladding or enclosure solutions are required — such as for walls, lightweight perimeter closures, temporary or decorative partitions, finishing elements, or technical coverings in commercial and industrial spaces.
The use of the T10 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The T10 corrugated sheet can be produced from three types of raw material: CRC (Cold Rolled Coils) and HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
The T10 profile can be manufactured from two raw material widths: 1250 mm or 1000 mm, and is produced in custom lengths, according to the customer’s specifications.
Technical Details
| Thickness: | 0.25 - 0.7 mm |
| Rib height: | 10 mm |
| Available effective widths: | 1100 / 880 mm |
| Length: | 500 - 13500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines
Wide range of fixing accessories and sheet metal components
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
This is a technically styled product, commonly used in projects that require a balance between lightweight construction and geometry suitable for a wide range of applications — such as wall cladding, light enclosures, annexes or technical spaces, and linings with both aesthetic and functional roles.
The use of the T18 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The T18 corrugated sheet can be produced from three types of raw material: CRC (Cold Rolled Coils) and HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
Technical Details
| Thickness: | 0,25 - 0,7 mm |
| Rib height: | 16,5 mm |
| Available effective widths: | 1119 mm |
| Length: | 500 - 13.500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines
Wide range of fixing accessories and sheet metal components
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
T30 Trapezoidal Profile Sheet is commonly used in cladding or partitioning applications, both indoors and outdoors. This profile offers an optimal balance between rigidity and lightweight structure, making it ideal for wall cladding, partitions, light enclosures, annexes or technical spaces, and linings with both aesthetic and functional purposes.
The use of the T30 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The T30 corrugated sheet can be produced from three types of raw material: CRC (Cold Rolled Coils) and HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
Technical Details
| Thickness: | 0,25 - 1,2 mm |
| Rib height: | 31 mm |
| Available effective widths: | 1050 mm |
| Length: | 500 - 13.500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines
Wide range of fixing accessories and sheet metal components
Available colours
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
Sinus 20 Corrugated Sheet is a wavy profile made from galvanized or pre-painted steel sheet, ideal for interior and exterior cladding where a clean, modern, and aesthetic finish is desired. With its continuous curved line, this profile delivers a distinct architectural look and integrates easily into commercial, industrial, or residential projects.
The use of the SINUS 20 profile varies depending on the specific project requirements and the technical solutions implemented during execution.
The SINUS 20 corrugated sheet can be produced from two types of raw material: HDG (Hot Dip Galvanized), or PPGI (pre‑painted) steel.
The SINUS profile can be manufactured from two raw material widths: 1250 mm or 1000 mm, and is produced in custom lengths, according to the customer’s specifications.
Technical Details
| Thickness: | 0,35 - 1,2 mm |
| Rib height: | 18 mm |
| Available effective widths: | 838,2 - 1066,8 mm |
| Length: | 500 - 13.500 mm |
| RAL colour palette: | Various options available |
The product can also be manufactured with double-sided paint or with paint applied on the negative rib side.
Short production deadlines
Wide range of fixing accessories and sheet metal components
Available colours
RAL 8017
RAL 3005
RAL 3011
RAL 5010
RAL 6005
RAL 7016
RAL 7024
RAL 9002
RAL 9006
RAL 9010
HDG Steel
CRC Steel
*The colours shown are for informational purposes only and may appear differently depending on your screen settings.
*Some of the colours and materials from our stock may be available in limited quantities or may currently be pending restocking.
*We can provide transportation upon request. Please consult a Doladela specialist for transport-related details.
*The company reserves the right to make any modifications or optimizations to its production or products that it deems necessary, at any time, without prior notice or consultation.
Updated stock information – additional colour and material options may be available beyond those listed.
Orders with special material requirements (colours, thicknesses, or coatings).
Orders for lengths exceeding 13,500 mm.
Fixing accessories (galvanized or colour-matched screws) and sheet metal accessories (ridge caps, corners, drip edges, etc.).
